12 Methods
PSA label era checker
Pick what you can see on your PSA or BGS label, add the grade and the card year, and see which era those features fit. The checker flags features that can't appear together on one genuine label. A label can expose a fake slab, but it can never prove one is real.
If several apply, pick the first one in the list.
Optional. The year at the start of the top line, such as 2024 or 1999-00
What a PSA label can and can't tell you
A PSA label can be placed in an era from what you can see on it: zeros with a slash through them mark PSA's first labels of 1991 and 1992, half grades became standard in 2008, a small PSA hologram joined the bottom middle of the front label in 2015, and the LightHouse label, PSA's current one, dates from 2017. This checker takes those features, plus the card year printed on the label, and shows the era range they fit, or flags two features that can't sit on one genuine label. It checks BGS label colours against the grade the same way. It never dates a slab from its cert number.
A fit means the features you picked belong to one label era. It can't show the slab is genuine, because counterfeit slabs copy real labels of the right era along with real cert numbers. What the checker can do is expose a label whose features contradict each other or the card inside it.
What this does not prove
- That the slab is genuine
- Counterfeit slabs copy real labels of the right era, and real cert numbers with them.
- The day it was graded
- Features give an era range, not a date, and a card can be moved into a newer holder long after it was first graded.
- What the grader recorded
- Only the grader's own cert page shows the card, grade and images on file for a number.
Label features, one era range
No era here comes from a cert number. Early PSA numbers were not issued in order, and year charts built from them are estimates.
PSA label styles by the features you can see
| Feature on the label | Era | What it tells you |
|---|---|---|
| Zeros with a slash through them | 1991 to 1992 |
PSA's first labels. The slashes went with the font change of 1992. |
| No hologram on the front | 1991 to 2015 |
Every PSA label before 2015. The styles of the 2000s changed in small ways that references date differently, so this stays one long era. |
| Half grade, such as 8.5 | From 2008 |
Half grades became standard in 2008. A very small number appear on the label style just before. |
| Small PSA hologram, bottom middle of the front | From 2015 |
PSA added the front hologram in 2015. |
| LightHouse label, QR code on the back | From 2017 |
PSA's current label. It keeps a hologram on the front. |
Only dates that two independent collector references agree on. Where they disagree, the era stays open.
BGS label colours and the grades they go with
| Label | Goes with | Notes |
|---|---|---|
| Black | 10, all four subgrades 10 |
Beckett's top label. A black label on any other grade is a clash. |
| Gold | 9.5 or 10 |
Gem Mint 9.5 and Pristine 10. |
| Silver | 8.5 or 9 |
Below 8.5 the published descriptions disagree, so the checker doesn't judge lower grades. |
| The 2026 label | Any grade |
Beckett launched a new label in 2026, so it dates a slab to 2026 or later. |
| No hologram | Older BGS labels |
Older BGS labels are not known for a security hologram, so a missing one is not a flag on its own. |
When two features come from different eras
A genuine PSA or BGS label is printed in one era, so every feature on it belongs to that era. A label that mixes them, such as an older layout with a newer logo, is one of the patterns seen on counterfeit slabs.
The card year is the easiest cross-check. A slab can't be older than the card inside it, so a 2020 card in a PSA label without a front hologram doesn't fit, while a 1990s card in a new label is normal: old cards are graded, and regraded into new holders, all the time.
A clash is a reason to look closer, not a verdict. Re-read the label first, then check the cert on the grader's own site and compare the card, the grade and any images it shows.
Where to look on a PSA label
Front label, left: card year and set
The top line of the front label starts with the card year, then the set.
- Card year
- Start of the top line
- Card name
- Second line
- Barcode
- Bottom left
Typical marking 2024 FINEST UFC
The year here is the card's year, not the year it was graded.
Front label, right: grade and hologram
The grade sits on the right of the front label. The small PSA hologram sits at the bottom middle.
- Grade
- Right side, under the card number
- Hologram
- Bottom middle of the front label
- Cert number
- Under the grade
Typical marking GEM MT 10
A front hologram means a label made in 2015 or later.
Back of the label: QR code
Turn the slab over. The LightHouse label carries a QR code on the back, with the cert number under it.
- QR code
- Centre of the rear label
- Cert number
- Under the QR code
Typical marking QR code and cert number
A QR code on the back means the LightHouse label, in use since 2017.
PSA label questions
What people ask about PSA and BGS labels, answered from the label features on this page.
What does a PSA label look like by year?
PSA's first labels, from 1991 and 1992, print zeros with a slash through them. From 1992 until 2015 the front of the label carries no hologram, and the small changes made during the 2000s aren't dated the same way by any two references, so treat that stretch as one long era. Half grades became standard in 2008. In 2015 PSA added a small PSA hologram to the bottom middle of the front label, and since 2017 its current label has been the LightHouse label, with a QR code on the back. The table on this page lists them side by side.
Can I tell when my PSA card was graded from the cert number?
Not reliably, and this checker doesn't try. PSA's early cert numbers were not issued in order, and the year charts collectors build from later numbers are estimates that disagree with each other. The label's features give a safer era range, and the card year printed on the label tells you the earliest the slab could have been graded. For what PSA itself recorded, open the cert on PSA's own site.
Does a matching cert number prove my PSA slab is real?
No. The cert number is printed on every slab and shows up in sale listings, so counterfeiters copy real numbers onto fake labels. A match shows only that the number exists. Compare what PSA's cert page shows, the card, the grade and any images, with the slab in your hand, and check that the label's features belong to one era. If anything disagrees, have the card authenticated.
What do the BGS label colours mean?
On a BGS label the colour follows the grade: gold for Gem Mint 9.5 and Pristine 10, silver for 8.5 and 9, and black for a Pristine 10 with all four subgrades at 10. Below 8.5 the published descriptions disagree, so this checker doesn't judge lower grades by colour. A colour that doesn't match the grade, such as a black label on a 9.5, is worth checking against Beckett's own record for that cert.
When did PSA add the hologram to its labels?
PSA added a small PSA hologram to the front of its labels in 2015, set at the bottom middle of the front label. Labels made before then have no front hologram, and the LightHouse label PSA has used since 2017 keeps a hologram on the front. So a front hologram means 2015 or later, and a recent card in a label without one is a clash worth checking.
What changed on the Beckett label in 2026?
Beckett launched a new label in 2026. A BGS slab with the new label was labelled in 2026 or later, while every earlier BGS label stays in the long era that began in 1999. Older BGS labels are not known for a security hologram, so a missing hologram on an older BGS slab is not a warning sign on its own.
How can I tell a fake PSA slab from a real one?
Start with the label. Every feature on a genuine label belongs to one era, so a label that mixes styles, or a recent card in a label style that had already ended, is a warning sign. Then check the cert on PSA's own site and compare the card, the grade and the images. Good fakes get the label right, so a clean result here proves nothing: the holder, the card and the label need to be examined together, which is what our trading card authentication does.
Why does my old PSA slab have no scan images on PSA's cert page?
Because PSA does not hold photos of every card it has graded. Its cert page shows scans for many recently graded cards, while an older cert often shows the record with no images, and PSA gives no cut-off date, so a missing photo on an older slab is not in itself a sign of a fake. The text still has to match exactly: the card, year, set, grade and cert number on your label against PSA's record. Where the record does carry scans, compare them with the slab in your hand, down to the centring and any marks on the card.
Get expert authentication
>99.89% accuracy · 2M+ verified





