How To Spot Fake Louis Vuitton Neverfull MM

Have you ever compared Louis Vuitton Neverfull MM fake VS real for a quick at-home authentication? If not, then we are about to show you!

If there is something that you still don’t understand about our methods it’s fine, just use our great authentication services. Our team is here to assist you at all times!

• The General Look Method
• The Sides Method
• The Print Method
• The Leather Tag Method
• The Hardware Method
• The Puller Method
• The Label Method
• The Fabric Method
• The Serial Number Method
• The Pochette Label Method

The General Look Method

If you're trying to find a bag that's fashionable and has a big room inside of it then this model should be the best. 

Replica factories failed to pay much attention to the size, as the authentic bag clearly is bigger than the one shown within the bottom picture. 

The colors are off too, because the bag is meant to be more dark brown with dark orange/ light brown details instead of gray with beige details on it. 

The same thing goes to the handles, as they're supposed to be darker.

The Sides Method

Very original thing about this bag is how the sides are taller than the center which creates a boat shape effect. 

This detail wasn't copied well because the height of the edge has to be the peak, not on the same level as the middle part, like it was done on the faux model. 

The screws that have handles attached to it are supposed to be farther from the upper edge. 

The stitching always gives away the replica. These stitches are done very symmetrically and tightly on the initial model, but the same cannot be said about the fake Louis Vuitton Neverfull.

The Print Method

We already talked about this detail but let's take a better look. 

You can already tell how grainy the unauthentic surface is, when it's supposed to be smoother. 

The details shouldn't be this weirdly defined and light colored, it should be slightly faded, darker brown and not beige. Overall look of the details on the original model is sharper, well-shaped and identical.

The Leather Tag Method

It's such a small detail that it wouldn't even make a difference- you may think to yourself. Well, allow us to prove you wrong. 

Replica factories think the exact same thing, this is often why they produce them carelessly. 

First of all, take a better look at the stitching. The first tag has symmetrical stitches made out of very thick and high-quality thread and the same can't be said about the faux model. 

You can see how thin, low-quality and mistakenly chosen colored this thread is and this wasn't even enough, as they created stitches carelessly that may come off at any minute. 

The initials AP must not even be there.

The Hardware Method

LV hardware is incredibly hard to duplicate, as the majority of the faux models have a toy-like look.

 Even though the original hardware wasn't made out of an actual gold, its vibrant color might make you believe otherwise; The color detail was clearly missed within the right picture. 

The original hardware seems to be wider and greater too. These scratches on the Neverfull bag replica model gives it an even worse look..

We hope that you are following our methods step-by-step. If you still have questions, we got your back. Just use our authentication services. Our helpful team is here to assist you 24/7!

The Puller Method

Identically to the previous method, puller turned out to be harder to duplicate than one would imagine. You can see how vibrant the color is within the left picture, while the Louis Vuitton Neverfull replica puller isn't even golden but silver with yellow undertones. 

The shape is additionally supposed to be rounder and wider just as shown on the initial hardware.

The Label Method

This label doesn't show up while wearing a bag, but it is vital to check it. First of all, the original label is much bigger and wider than the one shown in the bottom. 

The leather used in these two models are different too. The overall shape of the faux label is incredibly poorly replicated and stitched even worse. 

The letters are supposed to be larger and engraved deeply within the leather.

The Fabric Method

The replica factories did an ok-job while replicating the material inside the bag but there still are some flaws. First of all, the sizing of letters- they must be larger than they're on the unauthentic fabric, just as shown in the upper picture.

 Spacing between the letters and details must be bigger too.

The Serial Number Method

We are about to teach you a little "trick" by looking at the serial number. 

You can tell where your bag was produced by looking at the initials and our timetable attached down below: For example, initials LM stands for a location in Spain, which automatically means that the item was produced in Spain.

We should compare the serial number tags now: the letters and numbers on the Louis Vuitton Neverfull fake tag are too large and bold, when they are supposed to be small and thin like shown on the Louis Vuitton Neverfull authentic model.

The Pochette Label Method

Good thing about this model is that it comes with a small pochette. This label is stitched on it too.

This label was done better than previous ones, but still, the thickness of the leather has to be mentioned, which is stitched on the wall too poorly, with a low-quality thread which might come off at any minute.

The letters should be thicker and engraved, not "scratched".

In Conclusion…

Clearly, finding a real Louis Vuitton Neverfull in the world of replicas might not be hard if you followed our guide.

If you've got questions left unanswered, you are more than encouraged to go ahead and use Louis Vuitton authentication services. Our team will assist you 24/7!

Authenticate With Real Experts